home.md

@@ -28,18 +28,18 @@ O projeto da placa pode ser editado em [EasyEDA - Pulseira](https://easyeda.com/
 | Tipo | Quantidade | Posição | Valor | Descrição |
 | ------ | ------ | ------ | ------ | ------ |
 | Capacitor | 2 | C1,C2 | 22pF | Ceramic Capacitor, NP0, 22pF ±1%, 50V, 0402 |
-| Capacitor | 2 | C3,C4 | 1µF | Ceramic Capacitor, X7R, 1uF ±10%, 6.3V, 0402 |
-| Capacitor | 3 | C5,C8,C9,C12,C13,C14 | 0.1µF | Ceramic Capacitor, X7R, 0.1µF ±10%, 6.3V, 0402 |
+| Capacitor | 3 | C3,C4,C12 | 1µF | Ceramic Capacitor, X7R, 1uF ±10%, 6.3V, 0402 |
+| Capacitor | 5 | C5,C8,C9,C13,C14 | 0.1µF | Ceramic Capacitor, X7R, 0.1µF ±10%, 6.3V, 0402 |
 | Capacitor | 1 | C6 | 0.01µF | Ceramic Capacitor, X7R, 10nF ±10%, 50V, 0402 |
 | Capacitor | 1 | C7 | 2.2nF | Ceramic Capacitor, X7R, 2.2nF ±10%, 50V, 0402 |
-| Capacitor | 1 | C10,C11 | 10µF | Tantalum Capacitor, 10uF ±10%, 6.3V, CASE-R_2012 |
+| Capacitor | 2 | C10,C11 | 10µF | Tantalum Capacitor, 10uF ±10%, 6.3V, CASE-R_2012 |
 | Chave | 1 | SW1 | - | MSK12C02-HB - SWITCH SLIDE SPDT 300MA 4V |
 | Cristal | 1 | X1 | 16MHz | 16MHz ±10ppm Crystal 16pF 60 Ohms 4-SMD, No Lead |
 | Regulador | 1 | LDO1 | 3.3V | ME6211C33M5G-N |
 | Resistor | 1 | R1 | 10K | RES SMD 10K OHM 1% 1/16W 0402 |
 | Resistor | 2 | R2,R3 | 2.2K | RES SMD 2.2K OHM 1% 1/16W 0402 |
 | Resistor | 1 | R5 | 1K | 1 kOhms ±1% 0.063W, 1/16W Chip Resistor 0402 |
-| Resistor | 1 | R4,R9 | 22 | RES SMD 22 OHM 1% 1/16W 0402 |
+| Resistor | 2 | R4,R9 | 22 | RES SMD 22 OHM 1% 1/16W 0402 |
 | Resistor | 1 | R6 | 100 | RES SMD 100 OHM 0.5% 1/16W 0402 |
 | LED | 1 | LED1 | Amarelo | Yellow-Green 571nm LED Indication - Discrete 2V 0402 |
 | Conector USB | 1 | USB1 | - | USB - micro B USB 2.0 Receptacle Connector 5 Position Surface Mount, Right Angle |